Source apportionment of ultrafine and fine particle concentrations in Brisbane, Australia

Purpose

To investigate the significance of sources around measurement sites, assist the development of control strategies for the important sources and mitigate the adverse effects of air pollution due to particle size.

Methods

In this study, sampling was conducted at two sites located in urban/industrial and residential areas situated at roadsides along the Brisbane Urban Corridor. Ultrafine and fine particle measurements obtained at the two sites in June?CJuly 2002 were analysed by positive matrix factorization.

Results

Six sources were present, including local traffic, two traffic sources, biomass burning and two currently unidentified sources. Secondary particles had a significant impact at site 1, while nitrates, peak traffic hours and main roads located close to the source also affected the results for both sites.

Conclusions

This significant traffic corridor exemplifies the type of sources present in heavily trafficked locations and future attempts to control pollution in this type of environment could focus on the sources that were identified.     

Derivation of motor vehicle tailpipe particle emission factors suitable for modelling urban fleet emissions and air quality assessments

Background, aim and scope  

Urban motor vehicle fleets are a major source of particulate matter pollution, especially of ultrafine particles (diameters < 0.1 μm), and exposure to particulate matter has known serious health effects. A considerable body of literature is available on vehicle particle emission factors derived using a wide range of different measurement methods for different particle sizes, conducted in different parts of the world. Therefore, the choice as to which are the most suitable particle emission factors to use in transport modelling and health impact assessments presented as a very difficult task. The aim of this study was to derive a comprehensive set of tailpipe particle emission factors for different vehicle and road type combinations, covering the full size range of particles emitted, which are suitable for modelling urban fleet emissions.     

Fungal spore fragmentation as a function of airflow rates and fungal generation methods

The aim of this study was to characterise and quantify the fungal fragment propagules derived and released from several fungal species (Penicillium, Aspergillus niger and Cladosporium cladosporioides) using different generation methods and different air velocities over the colonies. Real time fungal spore fragmentation was investigated using an Ultraviolet Aerodynamic Particle Sizer (UVASP) and a Scanning Mobility Particle Sizer (SMPS). The study showed that there were significant differences (p < 0.01) in the fragmentation percentage between different air velocities for the three generation methods, namely the direct, the fan and the fungal spore source strength tester (FSSST) methods. The percentage of fragmentation also proved to be dependent on fungal species. The study found that there was no fragmentation for any of the fungal species at an air velocity ≤0.4 m s^?1 for any method of generation. Fluorescent signals, as well as mathematical determination also showed that the fungal fragments were derived from spores. Correlation analysis showed that the number of released fragments measured by the UVAPS under controlled conditions can be predicted on the basis of the number of spores, for Penicillium and A. niger, but not for C. cladosporioides. The fluorescence percentage of fragment samples was found to be significantly different to that of non-fragment samples (p < 0.0001) and the fragment sample fluorescence was always less than that of the non-fragment samples. Size distribution and concentration of fungal fragment particles were investigated qualitatively and quantitatively, by both UVAPS and SMPS, and it was found that the UVAPS was more sensitive than the SMPS for measuring small sample concentrations, whilethe results obtained from the UVAPS and SMAS were not identical for the same samples.     

Heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in surface sediments of the Naples harbour (southern Italy)

The Naples's harbour is one of the largest and most important commercial and tourist port of the Mediterranean basin. It is located on the southeast coast of Italy and receives industrial and municipal wastewaters from the city of Naples. Due to its social and economic impact, a comprehensive assessment of levels and sources of contamination of bottom sediments in this area of the Mediterranean basin is essential to identify potential danger due to mobilization of contaminants produced by managing of the same sediments. In this study, superficial sediments collected from 189 sampling sites were analyzed for grain size, heavy metals (Cr, Cu, Ni, Pb, V, Zn, Co, Sn, Cd, Hg, As, Al and Fe), 16 priority polycyclic aromatic hydrocarbons (PAHs) and perylene and 38 individual polychlorinated biphenyl (PCB) congeners. Compared to the estimated local background, Cu, Zn, Pb, Cd, Sn and Hg show enrichment factors >3 and only Hg evidences a median value higher than the NOAA (effects range - median) guidelines. Principal component analysis allowed us to clearly discriminate two areas mainly affected by heavy metals contamination and influenced by different sources related to industrial, commercial and/or urban activities. Priority PAHs are predominantly represented by three-five-ring compounds with concentrations ranging between 9 and 31774 ng g(-1) and frequently higher than the NOAA ER-M index. A prevalent pyrolitic origin of PAH was assessed on the basis of the relative abundance of the different congeners and selected isomer ratios. The concentrations of PCBs, as sum of the 38 congeners, ranged from 1 to 899 ng g(-1), with a predominance of highly chlorinated (tetra- and penta-chlorobiphenyls) congeners. WHO-TEQ values, calculated for the PCDD-like PCB congeners, suggest a relatively high level of toxicity. Generally, the concentration of PAHs and PCBs were higher near the sites of intense industrial, shipping and/or commercial activities suggesting a direct influence of these sources on the pollutant distribution patterns.     

Framing community forestry challenges with a broader lens: case studies from the Brazilian Amazon

Community forestry initiatives have been shown to reduce rural poverty while promoting the conservation and sustainable use of forests. However, a number of challenges face communities wanting to initiate or maintain formal, community-based forest management. Through a grounded theory approach, this paper uses three case studies of community forest management models in the eastern Amazon to create a framework showing challenges faced by communities at different phases of formal management. The framework shows that, in the development phase, four root problems (land ownership, knowledge acquisition, community organization, and adequate capital) need to be addressed to obtain legal management permission. With this permission in hand, further challenges to operationalization are presented (deterring illegal loggers, maintaining infrastructure, obtaining necessary managerial skills and accessing markets). The interrelatedness of these challenges emphasizes that all challenges need to be addressed in a holistic manner for communities to maintain a profitable and self-sufficient operation. This contradicts current development approaches that only address part of this framework. The framework proposed here can be used as a starting point for community forestry initiatives in other regions.     

Extensive cross-disciplinary analysis of biological and chemical control of Calanus finmarchicus reproduction during an aldehyde forming diatom bloom in mesocosms

Egg and faecal pellet production and egg hatching success of the calanoid copepod Calanus finmarchicus were monitored over a period of 14?days (14?C28 April, 2008) while fed water from 4 differently treated mesocosms and ambient water. Two of the mesocosms used were inoculated with the polyunsaturated aldehyde (PUA)-producing diatom Skeletonema marinoi, while 2 received only nutrient additions with or without silica. The mesocosms developed blooms of S. marinoi, mixed diatoms or the haptophyte Phaeocystis pouchetii, respectively. Faecal pellet production of C. finmarchicus increased with increasing food availability. Egg production increased with time in all mesocosms to a maximum single female production of 232 eggs female^?1?day^?1 (average of 90 eggs female^?1?day^?1) and followed the development of ciliates and P. pouchetii, but was not affected by the observed high (up to 15?nmol?L^?1) PUA production potential of the phytoplankton. The hatching success of the eggs produced on the mesocosm diets was high (78?C96%) and was not affected by either aldehydes in the maternal diet or exposure to the dissolved aldehydes in the water.     

Seasonal variations in zooplankton abundances in the Iturbide reservoir (Isidro Fabela, State of Mexico, Mexico)

This studywas undertaken to quantify the seasonal variations of zooplankton (rotifers, cladocerans and copepods) and selected physico-chemical variables (temperature, pH, conductivity, Secchi disc transparency, dissolved oxygen, ammonia, nitrate and phosphate concentrations) in the Iturbide dam. Monthly zooplankton samples (50 l filtered through 50 microm mesh, in duplicates from each of the 4 stations) were collected from February 2008 to January 2009. Simultaneously physico-chemical variables were measured. The zooplankton samples were fixed in 4% formalin in the field. In general, the temperature ranged from 9 to 16 degrees C, rarely exceeding 20 degrees C. Secchi transparency was nearly 100% since the reservoir was shallow (< 2 m) even during the rainy seasons. Dissolved oxygen was generally high, 13-18 mg l(-1). Nitrate levels (10 to 170 microg l(-1)) were low while phosphates were relatively high (9 to 35 microg l(-1)). The Iturbide reservoir was dominated by rotifer species. We encountered in all, 55 taxa of rotifers, 9 cladocerans and 2 copepods. The rotifer families Trichocercidae and Notommatidae had the highest number of species (7 each) followed by Colurellidae and Lecanidae (6 and 5 species, respectively). Trichocerca elongata, Ascomorpha ovalis, K. americana, K. cochlearis, Lepadella patella and Pompholyx sulcata were the dominant rotifers during the study period. On an annual average, rotifer density ranged between 50-200 ind.(-1). Among crustaceans Chydorus brevilabris and Macrothrix triserialis were most abundant. The maximal density of these cladocerans was about 50 ind. l(-1). Copepods were much lower in numbers (< 20 ind. l(-1)). In general the density of zooplankton was higher during summer months (April to July) than during winter. Shannon-Wiener diversity index varied from 1.0 to 4.3 depending on the site and the sampling period. Based on the data of Secchi transparency and nutrient concentrations, the Iturbide reservoir appeared to be mesotrophic.     

Change of PCBs and forms of heavy metals in sewage sludge during thermophilic anaerobic digestion

Determination of seven congeners of PCBs was carried out for sewage sludge before, during and after thermophilic digestion. The overall content of heavy metals (Zn, Cu, Ni, Cd, Pb, Cr) in sludge before and after digestion was determined. Moreover the concentration of heavy metals in particular chemical fractions of the sludge was analyzed. After the thermophilic digestion total concentration of seven PCBs was reduced by 47%, which suggests that thermophilic digestion affects PCB reduction positively. On the 10th d of the process, concentration of lower chlorinated PCBs increased, whereas those of higher chlorinated PCBs decreased. The thermophilic digestion process showed no accumulation of the studied heavy metals in the mobile fractions (exchangeable and carbonate) of the stabilized sewage sludge, except for nickel. The highest increase in zinc, copper, cadmium, and chromium concentration was observed in the organic-sulfide fraction, whereas the highest increase in lead was found in the residual fraction of the sludge. In case of nickel both fractions of organic-sulfide and exchangeable-carbonate fractions were enriched.     

Nest desertion is not predicted by cuckoldry in the Eurasian penduline tit

Engagement in extra-pair copulations is an example of the abundant conflicting interests between males and females over reproduction. Potential benefits for females and the risk of cuckoldry for males are expected to have important implications on the evolution of parental care. However, whether parents adjust parental care in response to parentage remains unclear. In Eurasian penduline tits Remiz pendulinus, which are small polygamous songbirds, parental care is carried out either by the male or by the female. In addition, one third of clutches is deserted by both male and female. Desertion takes place during the egg-laying phase. Using genotypes of nine microsatellite loci of 443 offspring and 211 adults, we test whether extra-pair paternity predicts parental care. We expect males to be more likely to desert cuckolded broods, whereas we expect females, if they obtain benefits from having multiple sires, to be more likely to care for broods with multiple paternity. Our results suggest that parental care is not adjusted to parentage on an ecological timescale. Furthermore, we found that male attractiveness does not predict cuckoldry, and we found no evidence for indirect benefits for females (i.e., increased growth rates or heterozygosity of extra-pair offspring). We argue that male Eurasian penduline tits may not be able to assess the risk of cuckoldry; thus, a direct association with parental care is unlikely to evolve. However, timing of desertion (i.e., when to desert during the egg-laying phase) may be influenced by the risk of cuckoldry. Future work applying extensive gene sequencing and quantitative genetics is likely to further our understanding of how selection may influence the association between parentage and parental care.